Digifly AIR-BT, Руководство пользователя

Страница: 39 / 96

AIR_Manual_506a_ENG_rev_1.pdf Page 39/96
in VARIOMETER SETUP \ n. 16 CRUT); default =15 seconds. When this happens, the plotter cleans up and the
zoom is automatically set on the basis of the calculated distance between the current position and the current
waypoint so both can be displayed on the plotter at the same time.
6.16 PLOTTER
 The plotter automatically displays different sets of information depending on
the different flight situations.
The plotter is always oriented to the North (North up) if no navigation is active,
otherwise it is always oriented to the center of the current waypoint.

Information that is always displayed during every flight situation:
o
Aerial position and bearing
o
Wind direction flag
o
Absolute wind direction (ex. SE)
o
Wind strength
o
Track of the last 40sec with variable width depending on the variometer’s values (i.e. thicker: better lift)
o
“T” icon (thermal)
o
Scale indicator showing the plotter’s width in meters

In “thermalling” mode:
o
The plotter zooms to the maximum level of enlargement defined by parameter VARIOMETER SETUP \ n. 18
THEZ“ Thermal Tutor zoom level”, with a range of 1 to 100 m/pixels; default value is 1 m/pixel,
corresponding to 25mt per each plotter’s square.

Information displayed during glide, without any navigation feature active:
o
The north up symbol “N”
The zoom’s value will be fixated at 10 m/pixels, corresponding to 250mt per square.

Information displayed in glide when a navigation feature is activated (Route):
o
Sketch of the current waypoint
o
Dashed line connecting the airplane (you) to the optimized point of the cylinder of the current waypoint
o
Dashed line connecting the optimized point from the current waypoint cylinder to the optimized point of the
next waypoint cylinder
The zoom’s value is automatically calculated depending on the waypoints’ distance

Information displayed in glide when the GOTO navigation feature is activated:
o
Waypoint’s sketch
o
Dashed line connecting the airplane (you) to the center of the waypoint
The zoom’s value is automatically calculated depending on the waypoint’s distance.