Jensen 1.0 DIN Head Unit
SMB
Jensen 2.0 DIN Head Unit
NAV Bus
GPS Antenna
SD
CARD
NAV104 GPS Navigation System
DATA BUS
GPS ANTENNA
Secure Smartbus Cable
with 11 mm ( 0.4 in ) Screw
Reset
Insert one end of the SmartBus cable into the “DATA BUS” slot on the side of the
NAV104 and secure it with an 11 mm ( 0.4 in ) screw (provided). Connect the other end
of the cable to the NAV104 input on the back of your Jensen navigation-ready
head unit.
Some compatible head units have a cable-to-cable
connection and do not require an anchor screw.
Where applicable, secure the cable to the
radio using an 11 mm ( 0.4 in ) screw.
Attach the
GPS Antenna
to the
“ANTENNA”
jack on the
side of the
NAV104.
Insert the SD Card into the SD Card Slot and gently
press the card in against the spring latch until it
stops, then release. The card will “lock” firmly into
place inside the SD Card Slot.
NAV104 Installation Guide
