DigiDesign PRE Скачать руководство пользователя страница 5

Страница: 5 / 52

Chapter 1: Introduction to PRE

chapter 1

Introduction to PRE

Welcome to the Digidesign

PRE™ multi-pur-

pose microphone preamplifier for Pro Tools

systems.

PRE is designed especially for use with Pro Tools
systems, but it can also be used as a stand-alone
microphone preamplifier. When used with
Pro Tools, most PRE features can be controlled
from within the Pro Tools application.

With or without remote control, PRE can be
configured manually using its front panel
switches and displays.

PRE can also be remotely-controlled by other
MIDI devices through standard MIDI controller
data. See Appendix C, “MIDI Controller Num-
bers.”

PRE Features

• Eight high-performance, discrete matched

transistor hybrid microphone preamplifica-
tion circuits

• Remote control with qualified Pro Tools TDM

systems and Digidesign control surfaces (such
as D-Control

, D-Command

, C|24™, Com-

mand|8

, Control|24™, and ProControl™)

• Industry-standard DB-25 output connectors

for easy connection to Pro Tools audio inter-
faces or any other recording or mixing me-
dium

• Each channel features:

• Support for microphone (XLR), line level

inputs (1/4-inch), or direct instrument
(1/4-inch)

• Selectable impedance settings for Mic input

• Input gain variable from 0 dB to +69 dB, in

approximately 3 dB steps, with an optional
–18 dB pad

• +48V power for condenser microphones

• Balanced Insert points (Send and Return),

for easy integration of outboard gear (such
as compressors or EQs)

• Phase invert

• 85 Hz High-Pass Filter

• Up to nine PREs supported through software

for up to 72 channels of remote-controlled
preamplification

• All features available in Stand-alone mode

What’s Included

• PRE unit

• AC power cable

• PRE Guide

• Digidesign Registration Information Card

Содержание PRE





















































Результаты поиска

Содержание PRE

Отзывы:

Бренды по названию

Популярные бренды

DigiDesign PRE, Руководство пользователя

Результаты поиска

Содержание PRE

Отзывы:

Бренды по названию

Популярные бренды