manualshive.com logo in svg

DigiDesign PRE, Руководство пользователя

Поделиться
Скачать
DigiDesign PRE Скачать руководство пользователя страница 29

Chapter 3: Remote Operation

25

To remap multiple channels in a path do one of the 
following:

„

Shift-click multiple channels, then drag the 

channels to the new locations in the Grid.

– or –

„

Marquis-select multiple channels, then drag 

them in the Grid.

Channel Shuffling

If the destination channel is already occupied, 
moving a signal from right to left results in a 
shuffle of other signals after the new destination 
channel. If the destination channel is already 
occupied, moving a signal from left to right 
shuffles any and all signals after the new desti-
nation channel and leaves the previous channel 
empty.

Additional Options in the I/O Setup 
Dialog

Naming Paths (Optional)

You can name PRE paths with custom names.

To name a path:

1  

Choose Setup > I/O.

2  

Click the Mic Preamps tab.

3  

Double-click the PRE path name and enter a 

name for the path. Press Tab to move to the next 
path (if any), or press Enter to set the new path 
name. 

4  

Click OK to close the I/O Setup dialog. If there 

are any identically named paths, you will be in-
structed to correct them before the I/O Setup di-
alog will close.

Resetting Paths (with the Default Button)

The Default button in the I/O Setup dialog al-
lows you to: 

• Reset selected path names to PRE #1, PRE #2, 

and so on, corresponding to the order that 
PREs appear in the Peripherals dialog.

• Create default mappings for all eight channels 

on all the currently selected PREs.

To reset path names:

1  

Do one of the following:

• Select a PRE path by clicking on its name.

– or –

• Select multiple PRE paths by Shift-clicking 

the desired path names.

2  

Click Default.

Active and Inactive Paths

Paths can be globally configured for Active or 
Inactive status in the I/O Setup Dialog. When 
PRE paths are inactive, they do not appear in the 
Mix or Edit windows.

Making a Mic Preamp inactive can be useful if 
the PRE will be disconnected from the MIDI port 
or powered off during a session. You can also 
make Mic Preamps inactive so that they do not 
appear in the Mix and Edit windows.

Содержание PRE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды