manualshive.com logo in svg

DigiDesign PRE, Руководство пользователя

Поделиться
Скачать
DigiDesign PRE Скачать руководство пользователя страница 16

PRE Guide

12

Output Trims 1–8

The output trims are used to individually cali-
brate each channel’s output and send level.

The output trims are factory-calibrated so that 
the clip point of the PRE output amplifier 
matches the factory-set clip point of the 192 I/O 
analog input. The PRE’s output level is –6 dBu 
below its maximum output of +28 dBu 
(+22 dBu). If you do not intend to use a 192 I/O, 
you should turn the trims all the way up (clock-
wise) to allow for maximum signal output 
(+28 dBu) and maximum performance.

MIDI In/Out/Thru Connectors

The MIDI connectors on PRE accept standard 
5-pin MIDI cables.

The MIDI In connector accepts MIDI input for 
remote control of PRE (for example, from the 
MIDI Out of a MIDI interface in a Pro Tools 
system).

The MIDI Out connector sends MIDI data out of 
the PRE to the MIDI input of a Pro Tools system, 
or another PRE. To daisy-chain multiple PREs, 
connect the MIDI Out of one PRE to the MIDI In 
of the next PRE, and so on. You will also need to 
set each unit to a unique MIDI channel number 
(refer to “MIDI Connections” on page 18). 

The MIDI Thru connector is not used for 
Pro Tools remote control.

Oscillator (OSC) Output

This is a balanced 1/4-inch TRS jack that outputs 
a fixed oscillator signal (+4 dBu reference signal 
at approximately 1 kHz) for calibrating the in-
puts of gear not connected through the DB-25 
output. For more information, see “OSC (Oscil-
lator) Switch and LED” on page 6.

AC Power 

This connector accepts a standard AC power ca-
ble (included). PRE is auto power-selecting 
(100V to 240V) and will automatically work 
with a standard modular cable to connect to AC 
power receptacles in any country.

Power Up Defaults

When you first power on PRE, it has the follow-
ing settings.

User Settings Stored in Memory

When PRE is powered down, it remembers its 
last settings. When the unit is powered back on, 
the last settings will be intact. 

The Send jacks and the DB-25 connector 
both use the output trims for adjustment. 
Calibrating a DB-25 output will affect the 
Send output level as well.

Power Up Defaults

Function

Status

Operation 
Mode

Stand-alone (Remote “Lock-Out” 
LED off)

Peak Hold

Off

OSC

Off

Shift

Off

Содержание PRE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды