manualshive.com logo in svg

DigiDesign PRE, Руководство пользователя

Поделиться
Скачать
DigiDesign PRE Скачать руководство пользователя страница 27

Chapter 3: Remote Operation

23

Declaring Multiple PREs

You can configure additional PREs (up to a total 
of nine) by repeating the above steps. Make sure 
that none of the PREs are assigned to the same 
MIDI channel (if daisy-chained) or port (if con-
nected to separate ports on your MIDI interface) 
in the Pro Tools Peripherals dialog (unless you 
want them to operate in ganged fashion).

Additional Options in the Peripherals Dialog

The following options can be set while you are 
declaring PRE in Pro Tools, but are also useful 
during sessions to lock out front panel controls 
or to globally change PRE settings.

Reset 

Click Reset to return PRE parameters to 

their defaults. Resetting takes place immedi-
ately; you do not need to click OK to reset pa-
rameters.

Retain Current Settings 

Select this option to re-

tain PRE channel settings when an existing ses-
sion with different settings is loaded. New ses-
sions will automatically retain the current 
settings.

The front panel settings that Pro Tools can re-
motely control are stored with the session, 
whereas the number of PREs declared, their 
lockout and retain current settings status, as 
well as their online/offline status and output as-
signments are stored as global (system) prefer-
ences.

Remote Lock-Out Mode 

Sets PRE to ignore front 

panel controls. Remote Lock-Out mode can be 
disabled by deselecting this option in the 
Pro Tools Peripherals dialog, or by power-cy-
cling the PRE.

Mapping PRE Outputs to Audio 
Interface Inputs in Pro Tools

Individual PRE outputs must be manually 
mapped to audio interface inputs before their 
audio and remote controls will be available 
within Pro Tools.

After mapping PRE channels to Pro Tools analog 
input paths, whenever you associate a track with 
an input path (created in I/O Setup) which is 
also a physical input that the PRE channel was 
mapped to, the PRE controls (identified as Mic 
Preamps) appear on top of the channel strip, 
giving you audio and control. Make sure that 
Display > Mix Windows Shows > Mic Preamps 
View is selected.

Press and hold Alt (Windows) or Option 
(Mac) while making changes to simulta-
neously apply changes to the selected Mic 
Preamp and all Mic Preamps below it.

When changing Mic Preamp sources and 
destinations with the Alt/Option key, up-
dates are applied sequentially (for example, 
changing the Receive From destination in 
the second row to PRE #2-2, will update the 
destination in the third row to PRE #3-2, 
and so on).

When Retain Current settings is not se-
lected, PRE settings will be overridden 
whenever you open a session that has PRE 
settings, even if no tracks exist in the ses-
sion.

To ensure you retain your current settings, 
check the Retain Current Settings box, be-
fore you open a session.

Содержание PRE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды