manualshive.com logo in svg

DigiDesign PRE, Руководство пользователя

Поделиться
Скачать
DigiDesign PRE Скачать руководство пользователя страница 35

Chapter 3: Remote Operation

31

Mic Preamp Remote Control 
with Digidesign Control 
Surfaces

Pro Tools systems configured with PRE remote 
control and a Digidesign control surface can use 
the control surface to control one or more Mic 
Preamps in Pro Tools.

ProControl

ProControl provides two modes of Mic Preamp 
remote control: Channel-Wide Gain Control 
and Individual Channel.

Channel-Wide Gain Control Mode

In this mode, if any of the tracks being con-
trolled by ProControl have a PRE associated 
with their input path, then the input gain for 
that PRE channel will be displayed in the en-
coder row and can be adjusted with the rotary 
data encoders. PRE channels will take up as 
many faders as needed for each PRE channel 
used in the session.

For each channel with a Mic Preamp, the LED 
ring around the encoder displays an approxima-
tion of the current input gain value. The 8-char-
acter display above each encoder shows the PRE 
unit number and channel number (for example, 
#1-1 = PRE unit #1, channel #1) followed by gain 
in dB. If the Mic Preamp channel has 48V en-
abled, a dot appears to the right of the label (for 
example, “#1/1•”).

The F3 switch, located at the top left of the Fader 
section, enables this mode (or returns ProCon-
trol to its previous operation mode). 

To set input gain for one Mic Preamp channel:

1  

Press F3 to enable Channel-Wide Gain Con-

trol mode.

2  

Rotate an encoder until the desired gain level 

is displayed.

To set input gain for multiple Mic Preamp channels 
simultaneously:

1  

Press F3 to enable Channel-Wide Gain Con-

trol mode.

2  

Press and hold SHIFT while pressing multiple 

SELECT buttons (to group multiple channels).

3  

Press and hold SHIFT while rotating 

an encoder in the group, until the desired gain 
level is displayed.

To exit Global mode:

„

Press F3 again.

Individual Channel Mode

This mode dedicates the ProControl’s DSP 
Edit/Assign section on the main unit for control 
of all parameters of a single PRE channel in Pro 
Tools. Multiple preamps can be adjusted if the 
tracks have lit SELECT buttons in conjunction 
with SHIFT and OPTION held while moving pa-
rameters.

The F2 switch, located at the top left of the Fader 
section, toggles between control of Mic Preamp 
channels and insert focus for the main unit's 
DSP Edit/Assign section.

For detailed information on using Digidesign 
D-Control, D-Command, C|24, or 
Command|8 with Pro Tools and PRE, see the 
guide for the corresponding product.

Содержание PRE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды