Chapter 4: Operating Hybrid
55
Matching Sounds
The Synthesis controls of the Presets page offer
the most commonly used parameters of Part A
and B. The layout of the controls compares well
to that of classic analog synthesizers. Use these
to quickly edit a part after loading a preset. In
addition, you can copy all settings from one part
to the other.
To copy part settings, do one of the following:
To copy the settings of Part A to Part B, click
Copy Part A to B
.
– or –
To copy the settings of Part B to Part A, click
Copy Part B to A
.
Oscillator
Octave
Sets the tuning of the part in octave
steps. The control range is from –2 to +2 octaves.
Tune
Adjusts the coarse and fine tune of the part
simultaneously. The control allows for steps in
semitones and cents. The control range is from
–7.00 to +7.00 semitones.
Filter
Cutoff
Adjusts the cutoff frequency.
Resonance
Adds character by emphasizing the
frequencies around the cutoff.
Attack
Sets the time for the attack segment of
the Filter envelope.
Release
Sets the time for the release segment of
the Filter envelope.
Amp
Level
Adjusts the volume of the part.
Pan
Sets the position of the part in the stereo
panorama.
Ins 1 (Insert1)
Activates and deactivates the first
insert effect of the part.
Ins 2 (Insert2)
Activates and deactivates the sec-
ond insert effect of the part.
Attack
Sets the time for the attack segment of
the Amplifier envelope.
Release
Sets the time for the release segment of
the Amplifier envelope.
Morph Groups
You can assign any rotary control or fader on the
plug-in surface to one of the Morph controls.
Also, graphic controls such as the envelopes or
LFOs can be assigned. Multiple controls as-
signed to one Morph control make up a Morph
group. This comes in handy to control all pa-
rameters that are assigned to one single Morph
control simultaneously. To allow for predictable
results, each Hybrid control has an adjustable
morph range. The Morph section provides the
following controls:
Morph Controls
The main controls for the
Morph groups, multiple Hybrid parameters can
be assigned to one of these.
Edit Morph Buttons
These buttons activate the
editing and displaying of assigned parameters of
a Morph group.
Clear Button
A clear button allows for deleting
all assignments of the edited Morph group.
Hybrid Morph controls
Содержание Hybrid
