DigiDesign Hybrid, Руководство пользователя

Страница: 52 / 84

Hybrid Plug-In Guide 48
Effects Inserts
The effects Inserts of Part A are located to the left
and the effects Inserts of Part B are located to the
right of the Effects page. The basic editing of the
four insert effects is the same. Below the title bar
of an effect Insert, there is a pop-up menu for
selecting an algorithm and a button to activate
tempo synchronization if applicable.
To select and activate an effect Insert:
„
Click the Insert selector and select an effect.
The Insert On/Off button lights automatically to
indicate the effect is active.
To activate tempo synchronization:
„
At the upper mid of the effect Insert, click the
Sync button to activate it. For example, delay
times or LFO rates of an effect display in frac-
tions of a beat.
To deactivate the current insert temporarily:
„
Click the Insert On/Off button so that the but-
ton is unlit.
To clear the insert of any effects:
„
Click the Insert selector and select
None
from
the pop-up menu. The On button of the effect
updates automatically.
Editing Effects
Each effect algorithm is of varying complexity
and unique in its sound and function. For this
reason, the different effects have a varying num-
ber of valid controls. The maximum number of
controls for each effects Insert is twelve. Un-
available controls are grayed out.
To adjust a value of an effects Insert:
„
Use the rotary controls of the Effect section
you want to adjust.
Not all of the available effect algorithms
provide tempo synchronization. The sync
option is only available when supported by
the effect.
The state of an effect is also shown on the
Ins1 and Ins2 buttons in the Amplifier sec-
tion of the respective part.
Depending on the algorithm, unused con-
trols are grayed.
Adjust an effects Insert