DigiDesign Hybrid, Руководство пользователя

Страница: 34 / 84

Hybrid Plug-In Guide 30
To select a modulation source:
„
Click the Mod Source selector and select a
source from the pop-up menu.
To adjust the modulation level:
1
Click the Modulation Level fader for the mod-
ulation destination and source you want to ad-
just.
2
Change the value.
• To increase the modulation, move the
Modulation Level fader to the right.
– or –
• To decrease the modulation, move the
Modulation Level fader to the left.
Envelope Sections
Each part includes four envelopes.
Filter Env
The Filter Envelope is unipolar, mean-
ing it modulates in one direction only. It pro-
vides five segments: Attack, Decay1, Decay2,
Sustain, and Release. The shape of the envelope
is modeled after classic analog synthesizers with
logarithmic attack and exponential decay and
release. In general, it modulates the Filter cutoff
by the amount set by the envelope parameter of
the Filter section. The modulation matrix allows
for additional uses of this envelope.
Amp Env
The Amplifier envelope is located to
the right of the Amplifier section. The envelope
is unipolar, meaning it modulates in one direc-
tion only. It provides five segments: Attack,
Decay1, Decay2, Sustain, and Release. The shape
of the envelope is modeled after classic analog
synthesizers with logarithmic attack and expo-
nential decay and release. The Amplifier enve-
lope is hard-wired to the amplifier to give shape
to the loudness of a sound. However, the modu-
lation matrix allows for additional uses of this
envelope.
Mod Env 1/2
The two Modulation envelopes are
located to the left of the Filter section. They
share one section on the surface. Their signals
are bipolar allowing for modulations in both di-
rections, positive and negative. They provide six
segments: Delay, Attack, Decay1, Decay2, Sus-
tain, and Release. The shape is linear for all seg-
ments. By default, the Modulation envelopes are
not assigned. Modulation envelopes can be used
as a modulation source on all Mod pages.
To access a Modulation envelope:
„
In the Mod Env section, click the Show Mod
Env selector of the Modulation envelope you
want to edit. The number highlighted in color
indicates the envelope that is currently being
edited.
Hybrid Filter envelope
Hybrid Modulation envelope