DigiDesign Hybrid, Руководство пользователя

Страница: 55 / 84

Chapter 4: Operating Hybrid 51
Reverb
This master effect provides a studio quality re-
verb. Use this effect to add spaciousness to your
sounds. It offers the common reverb parameters
to design a room.
Mode
Selects one of three basic timbres or tonal
qualities of the room. Choose one of the follow-
ing modes:
• Bright—For brilliant, clear sounding spaces.
• Natural—Produces open, natural sounding
spaces.
• Dark—With this type, high frequencies in the
reverb tail decay faster.
Pre-Delay The time elapsing between the direct
sound and the arrival of the first reflection is
called pre-delay. The Pre-Delay control adjusts
the time in milliseconds and ranges from 0 ms
to 250 ms.
Time
Adjusts the reverb time, hence the decay of
the reverb tail. The control range is from 0 s to
30 s.
Size
Adjusts the dimensions of the room. The
perceived width and depth is changing. The
control range is from 0% to 100%. Use smaller
values for smaller spaces.
Ambience
Puts the sound source deeper into the
room. The effect is comparable to bringing up
the level of ambient or overhead microphones
during the mix. The control range is from 0% to
100%.
Hi Cut
Fine adjusts the timbre or tonal quality of
the reverb tail from dark to bright. The control
range is from 1000 Hz to 20.000 Hz
Wet Mix
Adjusts the amount of reverb that
mixes with the original sound. The control
range is from 0% to 100%.
On
Activates and deactivates (bypasses) the
effect.
If you want a reverb on one Part only, add a
reverb to one of the part’s effects Inserts, in-
stead of to the Master Effects section.