Digi XBee Скачать руководство пользователя страница 251

Страница: 251 / 307

AT commands

Command mode options

XBee/XBee-PRO® S2C ZigBee® RF Module

251

Parameter range

0 - 0xFFFF [read-only]

Default

Set in firmware

AI (Association Indication)

Read information regarding last node join request.

Status
code

Meaning

0x00

Successfully formed or joined a network. (Coordinators form a network, routers and end
devices join a network).

0x21

Scan found no PANs.

0x22

Scan found no valid PANs based on current SC and ID settings.

0x23

Valid Coordinator or Routers found, but they are not allowing joining (NJ expired).

0x24

No joinable beacons were found.

0x25

Unexpected state, node should not be attempting to join at this time.

0x27

Node Joining attempt failed (typically due to incompatible security settings).

0x2A

Coordinator Start attempt failed.

0x2B

Checking for an existing coordinator.

0x2C

Attempt to leave the network failed.

0xAB

Attempted to join a device that did not respond.

0xAD

Secure join error - network security key not received.

0xAF

Secure join error - joining device does not have the right preconfigured link key.

0xFF

Initialization time; no association status has been determined yet.

Applications should read

until it returns 0x00, indicating a successful startup (coordinator) or join

(routers and end devices).

Parameter range

0 - 0xFF [read-only]

Default

N/A

Command mode options

The following commands are Command mode option commands.

Содержание XBee




















































































































































































































































































































Результаты поиска

Содержание XBee

Отзывы:

Digi XBee, Руководство пользователя, Страница: 251 / 307

Результаты поиска

Содержание XBee

Отзывы: