Digi TransPort, Руководство пользователя

Страница: 770 / 813

Manage files
Digi TransPort User Guide 770
Config Files
Most configuration information is stored in one of two files called CONFIG.DA0 and CONFIG.DA1 .
This allows two different sets of configuration information to be stored using the Save option in
the directory tree at the left of the web interface, or by using the config command from the
command line.
The
Save All button saves the following files:
You can select which of the two config files is loaded when the router is powered-up or rebooted
by setting the parameter Configuration > System > General > Miscellaneous > Use Config n
when the router powers up as required, or by using the config n powerup CLI command.
Note The CONFIG files only contain details of settings that have been changed from the default
values.
SREGS.DAT file
A combined set of AT command and S register settings are called a profile. Two such profiles,
profile 0 and profile 1 , can be stored for each ASY port in a file called SREGS.DAT . To save the file,
use the Save Profile button on the relevant Configuration > Network > Interfaces > Serial >
Serial Port n web page, or use the AT&W command.
Saving the settings for one ASY port does not save the settings for the other ports. You must save
the settings for each port individually.
For each ASY port, the profile to be loaded at reboot or power-up is specified in the
Power-up Profile setting on the relevant Configuration > Network > Interfaces > Serial >
Serial Port 0 web page, or use the AT&Y command).
You can load a profile for a particular ASY port to take immediate effect, using the Load Profile
button on the ASY port’s web page, the ATZ command.
File name Configuration held in file
config.da0 Main configuration parameters
pwds.da0 Encrypted passwords
fw.txt Firewall rules
sregs.dat Serial port S registers
x3prof X.25 PAD profiles