Digi One TS W, Руководство пользователя

Страница: 29 / 84

Chapter 8 Configuring PPP 29
Procedure
1. To configure the port for a modem, enter the following command:
set ports range=range dev=device
where range is the port or ports and device is one of the following:
• mout for outbound only modem connections
• mio for bidirectional modem connections.
See the set ports command in the Digi One/PortServer TS Command
Reference for more information.
Example
: set ports range=3 device=mout
2. To configure flow control for the ports, enter the following command:
set flow range=range flow-control=scheme
where range is the port or ports and flow-control=scheme is the flow control
required for this connection. Typically, for modem connections RTS and
CTS are on.
Example:
set flow range=3 ixon=off ixoff=off rts=on cts=on
See the set flow command in the Digi One/PortServer TS Command
Reference for more information.
3. To configure baud rate for this connection to the modem, enter the
following command:
set line range=range baud=bps
where range is the port or ports to configure and bps is the line speed in
bits-per-second. Typically, you can set this to 115000 bps for modem
connections.
Example:
set line range=3 baud=115000
4. If you do not want to use the Digi-supplied dialer script (genmdm) and
login script (loginscript), which work for most applications, use the set
script command to create your own scripts.
See the set script command in the Digi One/PortServer TS Command
Reference for more information.
5. If you do not want to use the Digi-supplied outbound device (gendialer),
which works for most applications, enter the following command:
set device name=name ports=ports dialer=name
where
• name=name is the name for this device
• ports=ports are the ports to associate with this device
• dialer=name is the name of a dialer script, either the Digi-supplied
script or a user-created one
6. To create a PPP user, enter the following command:
set user name=name protocol=ppp
where name is the name of the PPP user
Example:
set user name=pppout protocol=ppp