manualshive.com logo in svg

Digi One TS W, Руководство пользователя

Поделиться
Скачать
Digi One TS W Скачать руководство пользователя страница 11

Chapter 3

 Introduction

 11

Digi One/PortServer TS Command Reference

This online manual, available on the Software and Documentation CD, 
provides complete information on commands. 

RealPort Setup Guides

These online manuals provide information on setting up servers for 
RealPort software.

Online Help for the Web UI

This context-sensitive online help provides information on configuration 
fields used with web browser configuration interface. 

About Configuration Methods

Use this section to learn about configuration methods.

Configure the device server with the wizard

Simply follow the prompts and choose your configuration with the wizard. 
Choose either a Microsoft Windows or Unix platform.

Configuring the device server from an Attached Terminal 

With this method, you cable a terminal or PC running terminal emulation 
software to a device server port and then use the command line to enter 
commands. This method allows you to configure all features. It requires, 
however, that you and the device server be in the same location. Some 
users find it advantageous to configure the device server IP address this 
way and then use one of the other methods for the rest of the configuration.

Configuring the device server from a Telnet Session

With this method, you Telnet to the device server and use the command 
line to complete configuration tasks. The only disadvantage to this method 
is that you have to configure the device server with an IP address before 
you can Telnet to it.

Configuring the device server from the Web Interface

The great advantage to this method is ease of use. This method requires 
that you configure the IP address before you can access the configuration 
from the web interface, however, some features cannot be configured this 
way.

Downloading a Configuration File

With this method, you configure a Digi device and then do the following:

1. Download an existing configuration file to a host system.

2. Edit the file with specific configuration using a text editor.

3. Upload the file to the device server. 

This an excellent method for maintaining highly similar configuration files 
for multiple Digi devices. The disadvantage is that the device server 
requires some configuration steps, such as the IP address, to be 
completed before it can be used.

Содержание One TS W





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды