Digi ConnectPort LTS 16, Справочник по командам

Страница: 82 / 169

Command descriptions set permissions
ConnectPort® LTS Command Reference 82
Permissions for the “set group” command. (See "set group")
s-host={none|read|rw}
Permissions for the “set host” command. (See "set host")
s-internalmodem={none|read|rw}
Permissions for the “set internalmodem” command. (See "set internalmodem")
s-lcd ={none|read|rw}
Permissions for the “set lcd” command. (See "set lcd" )
s-modem ={none|read|rw}
Permissions for the “set modem” command. (See "set modem")
s-network={none|read|rw}
Permissions for the “set network” command. (See "set network")
s-permissions={none|read|rw}
Permissions for the “set permissions” command itself.
s-pmodem={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set pmodem” command. (See "set pmodem")
s-portauth ={none|read|rw}
Permissions for the “set portauth” command. (See "set portauth")
s-ppp={none|read|rw}
Permissions for the “set ppp” command. (See "set ppp")
s-profile={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set profile” command. (See "set profile")
s-python={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set python” command. (See "set python")
s-rtstoggle={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set rtstoggle” command. (See "set rtstoggle")
s-sdmemory ={none|read|rw}
Permissions for the “set sdmemory” command. (See "set sdmemory")
s-serial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set serial” and "set switches" commands. (See "set serial" and "set switches")
s-service={none|read|rw}
Permissions for the “set service” command. (See "set service")
s-snmp={none|read|rw}
Permissions for the “set snmp” command. (See "set snmp")
s-socket-tunnel={none|read|rw}
Permissions for the "set socket_tunnel" command. (See "set socket_tunnel")
s-sysauth ={none|read|rw}
Permissions for the “set sysauth” command. (See "set sysauth")
s-system={none|read|rw}
Permissions for the “set system” command. (See "set system")
s-tcpserial={none|r-self|read|rw-self|w-self-r|rw}
Permissions for the “set tcpserial” command. (See "set tcpserial")
s-trace={none|read|rw}