Digi ConnectPort LTS 16 Скачать руководство пользователя страница 151

Страница: 151 / 169

Command descriptions

set usb

ConnectPort® LTS Command Reference

151

Disable the USB device.

format

Format the device, using a default file system type of ext2. To format with an alternate file system
type, use the “fstype” option.

fstype={ext2|vfat}

The file system type.

ext2

ext2 or second extended filesystem.

vfat

Virtual file allocation table filesystem.

USB Modem options

Obtain the values for these options from your cellular service provider.

apn=

string

The Access Point Name (APN).

pin=

string

The pin for logging on the USB modem.

number=

string

The dial-in number for logging onto the cellular network for the USB modem.

auth={none|chap|pap|both}

The authentication protocol for connections over the USB modem.

none

The remote user does not require authentication.

chap

Challenge Handshake Authentication Protocol (CHAP) authentication is required.

Note

MS-CHAP is not supported.

pap

Password Authentication Protocol (PAP) authentication is required.

both

Both CHAP and PAP authentication are required.

The default is “none.” CHAP authentication works between two Digi Connect products. CHAP will be
negotiated to PAP for all other connections.

user=

string

The user name for logging onto the cellular network via the USB modem.

password=

string

The password for logging the specified username onto the cellular network via the USB modem.

Содержание ConnectPort LTS 16










































































































































































Результаты поиска

Содержание ConnectPort LTS 16

Отзывы:

Digi ConnectPort LTS 16, Справочник по командам, Страница: 151 / 169

Результаты поиска

Содержание ConnectPort LTS 16

Отзывы: