Digi ConnectPort LTS 16, Справочник по командам, Страница: 128 / 169

Command descriptions set switches
ConnectPort® LTS Command Reference 128
set switches
Purpose
Configures Multiple Electrical Interface (MEI) settings on a per-port basis, and displays current MEI
settings. MEI settings include the type of electrical interface (EIA-232 or EIA-485), the number of
differential wires used for communication, and whether termination and biasing resistors are used.
Required permissions
The serial permissions associated with the "set serial" command also apply to this command. For
products with two or more users, to use this command, permissions must be set to one of the
following.
n
For a user to display the serial settings for the line on which they are logged in:
“set permissions s-serial=r-self”
n
For a user to display the serial settings for any line:
“set permissions s-serial=read”
n
For a user to display and set the serial settings for the line on which they are logged in: “set
permissions s-serial=rw-self”
n
For a user to display the serial settings for any line, and set serial settings for the line on which
the user is logged in:
“set permissions s-serial=w-self-r”
n
• For a user to display and set the serial settings on any line:
“set permissions s-serial=rw”
See "set permissions" for details on setting user permissions for commands.
Syntax
Configure MEI settings
set switches [port= range]
[mode={232|485}]
[wires={two|four}]
[termination={on|off}]
Display current MEI settings
set switches
Options
range= range
The port or range of ports to which this command applies.