Digi ConnectPort LTS 16 Скачать руководство пользователя страница 34

Страница: 34 / 169

Command descriptions

info

ConnectPort® LTS Command Reference

Statistic

Description

InUnknownProtos

Number of received datagrams discarded because the specified protocol is
not available.

OutDiscards

Number of outgoing datagrams that were discarded for miscellaneous
reasons. This statistic is not used and is always zero.

InDiscards

Number of received datagrams discarded for miscellaneous reasons.

FragCreates

Number of outgoing datagram fragments created.

ReassembleOks

Number of received datagrams that were successfully reassembled from
fragments.

FragOks

Number of outgoing datagrams that were fragmented.

FragFails

Number of outgoing datagram fragmentation attempts that failed. This
statistic is not used and is always zero.

Serial statistics

Statistic

Description

rbytes

Total data in: the number of bytes received.

tbytes

Total data out: the number of bytes transmitted.

overrun errors

The number of times FIFO has overrun. The next data
character arrived before the hardware could move the
previous character.

frame errors

The number of framing errors detected. The received data
did not have a valid stop bit.

parity errors

The number of parity errors detected. The received data did
not have the correct parity setting.

breaks

The number of break signals detected.

TCP statistics

Statistic

Description

InSegments

Number of segments received.

OutSegments

Number of segments sent.

InErrors

Number of segments received with errors.

RetransmitSegments Number of segments retransmitted. Segments are retransmitted when the

ConnectPort LTS product doesn't respond to a packet sent by the client. This
is to handle packets that might get lost or discarded somewhere in the
network.

Содержание ConnectPort LTS 16










































































































































































Результаты поиска

Содержание ConnectPort LTS 16

Отзывы:

Digi ConnectPort LTS 16, Справочник по командам, Страница: 34 / 169

Результаты поиска

Содержание ConnectPort LTS 16

Отзывы: