Digi 70002405, Руководство пользователя

Страница: 115 / 163

Configure the device using the ConnectPort LTS web interface Applications pages
Digi ConnectPort LTS User Guide 115
5. Under Authentication Configuration , complete the following fields:
n
User Name : Type the user name.
n
Password/Confirm Password : Type the password.
n
Phone Number 1 : Specifies the phone number used to connect to the remote system.
n
Phone Number 2 : Specifies the alternate phone number used to connect to the remote
system.
n
Authentication : Choose one of the following authentication methods:
l
NONE : The remote user does not require PPP authentication.
l
CHAP : Challenge Handshake Authentication Protocol (CHAP) authentication
provides secure encrypted authentication. CHAP periodically verifies the identity of
the peer using a 3-way handshake. This is done upon initial link establishment and
may be repeated anytime after the link has been established. (See RFC 1334 for
details.) CHAP authentication will work between two ConnectPort LTS devices.
Note MS-CHAP (Microsoft specific implementation of CHAP) is not supported.
l
PAP : Password Authentication Protocol (PAP) authentication is required. PAP
provides a simple method for the peer to establish its identity using a 2-way
handshake. This is done only upon link establishment. (See RFC 1334 for further
details.)
l
BOTH : Both CHAP and PAP authentication are required (recommended).
n
Use login script : Enable when you want to use a login script and type the path to the
login script in the Dial chat script field.
PPP authentication uses this information.
6. Under Peer Configuration , select one of the following options for assigning the IP address of
an incoming PPP client:
n
Automatically obtain remote IP address remote peer : Select this option if you want
to automatically assign the IP address supplied by the remote peer.
n
Request specific address : Select this option if you want to request the specified IP
Address from the remote peer. There is no guarantee this IP address is assigned to this
connection. The address is only requested. Some service providers do not allow you to
request IP addresses and others only allow you to assign a certain range of addresses.
Ask the service provider of the system you want to connect to if you can request an IP
address.
Advanced PPP Settings
The ConnectPort LTS product uses advanced PPP settings to enable the routing table to use and
process ARP requests received by this device. Process ARP requests are also known as Proxy ARP.
ARP requests inform devices how and where to connect to a specific device. PPP connections use this
setting. The setting is disabled by default.