Configure the device using the ConnectPort LTS web interface
Applications pages
Digi ConnectPort LTS User Guide
108
6.
Incoming PPP Connections
: Use this section to make and maintain rules for incoming PPP
connections. To make a new rule for incoming PPP connections.
a. Click
New connection
.
b. On the
Serial Port
section of the Incoming connection page, select the serial ports
for this connection rule.
c. On the
Authentication Configuration
section, type the
User Name
and
Password
to use for PPP authentication such as NONE/PAP/CHAP/BOTH.
Note
To use the
Local
authentication method for serial port authentication, you
must enter the
User Name
and
Password
of an existing system user.
If you are going to use the
None
method for serial port authentication, you can add
any user, including users not in the local database of system users, and you can
select a user name from the
PPP User
menu on the Authentication page of the
serial port.
d. Select the authentication method from one of following methods:
NONE
: The remote user does not require PPP authentication.
PAP
: Password Authentication Protocol (PAP) authentication is
required.
CHAP
: Challenge Handshake Authentication Protocol (CHAP)
authentication is required.
BOTH
: Both CHAP and PAP authentication are required.
e. In the
Peer Configuration
section, select one of the following options for assigning
the IP address of the incoming PPP client:
Automatically assign remote IP address from IP address pool
: If
you select this option, the IP address for the incoming PPP client will
be automatically assigned from the IP address pool set on the Basic
PPP Settings page.
Allow remote peer to specify remote IP address
: If you select this
option, the incoming PPP client will specify the IP address used for
the PPP connection.
Assign static remote IP address
: If you select this option, the IP
address for incoming PPP client will be assigned as specified by the
Remote IP address.
Содержание 70002405
Страница 1: ...ConnectPort LTS User Guide ...
