14
blinking. Press or to set the desired start time hour (12), please note and
select AM or PM. Press the minute is blinking, press or to set the desired
start time minute (30).
Press and 1 day is
blinking. Press the or
to select the number of
days to delay the start
time.
14. PROGRAMMING WATERING DURATION
This setting determines the length of time that each valve will remain open. Up to
4 hours of watering can be selected for each valve on each program in 1-minute
increments.
Turn the to DURATION mode.
The screen with the program used A, B or C, the time is set to 0:00, the duration
icon appears and the icon above the valve # appears blinking. Press the
hour digit is blinking. Press or and set the desired duration time in hour (Max
of 3:59 can be added).
Press the minute is
blinking, press or
and set the desired
time in minutes (30).
Press and skip to
next valve. Press the
hour digit is blinking.
Repeat the same steps
for each active valve.
