Dietz Sango Advanced F Скачать руководство пользователя

Страница: 39 / 40

• whether the dealer should order a new product/part from the

manufacturer. The dealer then receives an invoice detailing the shipping

costs involved. The dealer arranges and pays for the defective product/

part to be sent to the manufacturer. Once the manufacturer has received

the defective product/part, it is assessed. If the manufacturer deems the

warranty claim to be justified, the dealer receives a credit note for the new

product/part ordered and the shipping costs involved.

If the warranty claim is deemed to be unjustified, the dealer is informed and the

manufacturer makes an offer for the costs of replacement parts and/or provides

an indication of the cost of repair. Once the dealer agrees to this, the product/part

is repaired and/or replaced at the dealer's expense and returned at the dealer's

expense. The dealer can also opt to have the product/part returned without repair

at the dealer's own expense.

2017-05

SANGO ADVANCED / SLIMLINE - 39

8 Warranty conditions

Содержание Sango Advanced F









































Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды

Dietz Sango Advanced F, Руководство по обслуживанию

Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды