4 Replacements and adjustments
4.1. Preparation
WHEELCHAIR for the most common wheelchair settings (chapter 5).
Warning!
• Take all the safety guidelines (2.1) into account when carry out any
maintenance or repairs to the wheelchair.
• Only do maintenance on an empty wheelchair.
4.1.1. Disconnect the battery and/or
motor connector
For some maintenance the battery
and/or motor connector needs to be
disconnected. There is made a reference
to this action where needed:
1. Loosen the two allen keys of the cover
between the wheels.
2. Open the cover of the power module
3. Disconnect the motor connector (A
figure 2) and/or battery connector (B)
from the interconnection of the power
module.
4.2. Carrier
4.2.1. Replace the rubber suspension
1. Follow the preparation (see 4.1).
2.
Unscrew the bolt (A figure 3). Make
sure the battery box will be supported.
3. Replace the rubber suspension (B).
4. Tighten the bolt.
A
B
2
3
4 Replacements and adjustments
SANGO ADVANCED / SLIMLINE - 13
