Dietz Sango Advanced F Скачать руководство пользователя

Страница: 37 / 40

8 Warranty conditions

Dealers and/or users have statutory (legal) rights in relation to the purchase of

consumer products. The warranty conditions applying to products/parts sold by

DIETZ-Power B.V. are set out below. The warranty applies to any product/part

that becomes defective or needs to be repaired or replaced as the result of a

manufacturing fault or material defect within the stated warranty period.

Term

Definition

Manufacturer

The warranty provider:

DIETZ-Power B.V.

Vlamovenweg 12

5708 JV Helmond

The Netherlands

Dealer

the other party with which DIETZ-Power B.V. enters into

a Contract for the (re)sale of Products, on the basis of a

distribution agreement or otherwise

User

the party by whom the Products are intended to be used;

Warranty period

Duration of the warranty

Product/part

The product or part supplied by DIETZ-Power B.V.

Option/accessory Part supplied along with the original product as an add-on to

the standard model.

Reserve part

Durable part bought after the original product was

purchased.

Wear part

Part subject to natural wear under normal usage.

8.1. Warranty period

The warranty period starts on the date the manufacturer supplies the product/part

to the dealer. The warranty period shall not be extended following repair.

Product/part

Warranty period

Frame/assembly, including supplied options and

accessories

2 years

Drive system

1 year

Electronics, such as the controller and electronic

components

1 year

Reserve parts

1 year from invoice date

Wear parts, including upholstery

40 days from invoice date

Batteries

BATTERY

Tyres

no warranty

SANGO ADVANCED / SLIMLINE - 37

8 Warranty conditions

Содержание Sango Advanced F









































Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды

Dietz Sango Advanced F, Руководство по обслуживанию

Результаты поиска

Содержание Sango Advanced F

Отзывы:

Похожие инструкции для Sango Advanced F

Бренды по названию

Популярные бренды