Horizontal-Schrumpfgerät
Horizontal Shrinking Device
HS 1100-P
BA_79-E.docx
Copyright © Diebold 2017-04 Ersteller: kh
Seite 47 von 60
20.
Handling tool holders
The different tool holders are inserted up to the stop on the receiving rail and secured
with the clamping screw against displacement.
The tool holders for HSK and SK / BT have a Ejector pin to push the cutting tools during
unshrinking from the clamping bore.
Clamping the Ejector pin with the clamping bolt for Ejector pin you will get a length stop
of the tools while shrinking.
20.1.
Tool holder HSK-40 to HSK-100
Shrink fit chucks with HSK taper are inserted into the tool holder and the clamp handle
is swung down. By this means the shrink fit chuck is clamped by an internal cam.
