DIEBOLD HS 1100-P, Руководство пользователя

Страница: 11 / 32

Horizontal-Schrumpfgerät
Horizontal Shrinking Device
HS 1100-P
BA_79-E.docx Copyright © Diebold 2017-04 Ersteller: kh Seite 39 von 60
17.3. Quality of the tools and chucks
Tool shafts and shrink fit chucks must have the following characteristics to guarantee a
easy on- or unshrinking process.
17.3.1. Tool shanks

must be smooth

must be free of oil and grease

preferably should not have a clamping face

must not have any marking with raised areas

must have the necessary tolerance quality
The following shank tolerances are required for the various shank diameters:
Shank-Ø Shank tolerance Tool type
3 mm h4 Carbide
4 mm h4 Carbide
5 mm h5 Carbide
≥ 6 mm h6 Carbide or HSS
17.3.2. Shrink fit chuck holes

must be smooth

must be free of oil and grease

must have the necessary quality of tolerance