Horizontal-Schrumpfgerät
Horizontal Shrinking Device
HS 1100-P
BA_79-E.docx
Copyright © Diebold 2017-04 Ersteller: kh
Seite 43 von 60
19.4.
Shrinking with Parameters
21.
Turn on the unit with the main switch
22.
Select the shrink chuck type using the ”Menü“ button
Menu and the shrink chuck types will appear:
Manual:
Shrinking without parameters
Standard:
DIN holder contour (without grooves)
II TSF:
Slim holders (2 grooves)
(To shrink Carbide tools only, not HSS shanks!)
IIII Pyroquart:
Holders with Pyroquart contour (4 grooves)
TER 11 to 32:
Shrink Collet TER / ER 11 to ER 32
23.
Select the tool shank-Ø with the „+“ or „–“ button
24.
Insert the correct ferrite interchangeable disc in the coil
Disc selection:
Ø3-5
Ø6-12
Ø14-22
Ø25-32
25.
Set the induction coil in the position over the heat shrink tool so that the shrink
chuck is in contact with the ferrite interchangeable disc
26.
Start the shrinking process with the “Start/Stop“ button
27.
At the end of the shrink cycle, shrink or un-shrink the tool
