Dickson WiZARD2, Руководство пользователя

Страница: 17 / 33

Page | 17
Active/Inactive/Loggers/Repeaters
•
Making a Logger/Repeater Inactive:
o
If a Logger is returned for calibration or a Logger or Repeater is taken out of service, Edit
the affected unit and change Logger Status to
InActive
and remove power from the
Logger/Repeater.
o
A Repeater can not be made inactive if an active device is attached to it. Use the
Structure Screen to see if any devices are attached.
•
Hiding Inactive Loggers:
o
Inactive Logger/Repeaters will automatically be removed from the Loggers, Structure
and Devices tabs.
o
To display InActive Loggers/Repeaters, go to Options, Settings, and check the box next
to Display Inactive Devices.
o
Logged data will still remain in the database for all Inactive Loggers.
•
Returning a Logger to Active Status:
o
To return a Logger to active status, connect the Logger to the PC via the USB cable. The
Edit Logger window will open. Change Status to Active (other settings can also be
changed at this time) and click on Save Changes and Start.
o
The Logger will be cleared and updated.
Alarm Operation:
Alarm Conditions
•
The following alarm conditions will trigger popup alarms in the W2 software:
o
Alarm Min / Max Reading
o
Low Battery
o
Lost Communications
o
Calibration Due
•
The popup alarms can not be turned off.
•
Simply closing the alarm popup will not clear the alarm but will prevent a new popup from
appearing while the client application is open.
•
To clear an alarm click on the Clear Alarm button for that logger in the Logger tab table.
•
The table field with the alarm condition will turn dark red to indicate an alarm. Closing the
alarm popup will change the color to light red. Clearing the alarm will remove the red
indicator.