Dickson WiZARD2, Руководство пользователя

Страница: 13 / 33

Page | 13
Replacing Device Batteries
Either AA Alkaline or Lithium batteries are compatible.
Lithium batteries should increase battery life by 1.5x over standard alkaline batteries.
o
Receiver: Unplug the Receiver from USB and AC power. Turn the On/Off switch to Off. Unscrew
the battery door on the back of the unit and replace with 4 AA batteries. Replace the battery door.
Slide the On/Off switch to ON and reconnect AC power. Reconnect USB cable. Receiver will reconnect
with W2 client.
o
Repeater:
Unplug the Repeater from USB and AC power. Turn the On/Off switch to Off. Unscrew
the battery door on the back of the unit and replace with 4 AA batteries. Replace the battery door.
Slide the On/Off switch to ON and reconnect AC power.
o
Logger:
Remove AC (if used) and turn the On/Off switch to Off. . Unscrew the battery door on
the back of the unit and replace with 4 AA batteries. Replace the battery door. Slide the On/Off switch
to ON and reconnect AC power (if used).
The logger must now be cleared. Either bring the logger
back to the host PC and clear it via USB or go to the host PC, right click on the logger, selected Edit
and click on Clear logger. This will reset the time/date stamp in the logger to the correct time. Even
if replacing batteries took only a minute, the time date stamp may be corrupted by turning the
logger off.
Configuring Email and Text Message Notifications
Notification of alarm conditions can be sent automatically to up to 6 different email/text accounts for each
logger. Addresses can be assigned to multiple loggers. For the following conditions:
o
Alarm Max
o
Alarm Min
o
Low Battery
o
Calibration Due
o
Lost Communications
Please contact your IT Manager to determine if you have your own SMTP server. If so, they will assign you
the correct SMTP server address, port and other required configuration settings. If you are using an external
email server, you must contact your service provider for the correct SMTP server address, port and
configuration settings.
1. Configuring your Email/Text settings:
a. Got to Options/Email Addresses and click on the Configuration tab