Dick SM-200 TE Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 76

Dick SM-200 TE Скачать руководство пользователя страница 73

SM-200 TE Grinding and Honing Machine

73

Accessories and Spare Parts

11

Use only F. DICK original accessories that are specified in the
operating instructions. The Friedr. DICK specialist advisers or the
supplier of the machine will be happy to help you if you have any
questions.
See "Ordering accessories and spare parts" on page 73 for order-
ing accessories.

11.2 Spare parts

The spare parts drawing and spare parts list are available at
www.dick.de.

11.3 Circuit diagram

The circuit diagram for the SM-200 TE grinding and honing
machine is available at www.dick.de.

11.4 Ordering accessories and spare parts

Use only F. DICK original accessories or spare parts that are spec-
ified in the operating instructions or diagrams and spare parts lists
at www.dick.de for the SM-200 TE grinding and honing machine.

CAUTION

Risk of accidents due to incorrect accessories.

Using accessories that are not matched to the SM-200 TE grinding
and honing machine constitutes an unassessable risk.

• Use exclusively F. DICK original accessories.

CAUTION

Risk of accidents due to incorrect accessories.

Using parts that are not matched to the SM-200 TE grinding and
honing machine constitutes an unassessable risk.

• Use exclusively F. DICK original accessories and F. DICK

original spare parts.

«
...
71
72
73
74
75
...
»

Содержание SM-200 TE













































































Отзывы:

Нет отзывов