Diamondback 510Sr, Руководство пользователя

Страница: 11 / 40

510Sr Owner’s Manual
11
1. Thread the four (4) Allen bolt and flat
washer assemblies ( J ‐ 2 & J ‐ 3 ) through the
base of the seat back assembly ( M ) and
into the seat slide assembly ( H ). Tighten
firmly after all bolts are engaged.
2. Thread the four (4) Allen bolt and flat
washer assemblies ( I ‐ 2 & I ‐ 5 ) through the
seat back mount ( N ) and into the threaded
holes in the backside of the seat back ( P ).
Tighten firmly after all bolts are engaged.
3. Thread the seat height adjuster knob ( N ‐ 5 )
into the seat back mount ( N ) two turns.
4. While pulling outward on the seat height
adjuster knob ( N ), slide the seat back onto
the seat mast ( M ). Release the knob to
engage set the pin. Ensure the seat back
assembly is indexed in one of the height
adjustment holes. Rotate the knob ( N ‐ 5 )
clockwise to lock the position.
5. Thread the four (4) Allen bolt and flat
washer assemblies ( J ‐ 2 & J ‐ 3 ) through the
seat base mount ( J ) and into the seat slide
assembly ( H ). Tighten all bolts firmly.
6. Thread the four (4) Allen bolt and flat
washer assemblies ( I ‐ 4 & I ‐ 5 ) through the
underside of the seat base mount ( J ) and
into the threaded holes in the underside of
the seat base ( Q ). Tighten all bolts firmly.