_______________________________
DOUGH
MIXER
IRIS
_______________________________
13
4.1
PRIOR TO USE
ATTENZIONE
It is advisable to remind the operator that
he is obliged to read and understand the
instructions in this manual, particularly
the ones in «Section 2» dedicated to
safety, before proceeding with normal use
of the machine. The operator must also
check to make sure that the machine is in
order and that any parts liable to wear and
deterioration are perfectly efficient.
DANGER
ALL THE ASSEMBLY, DISASSEMBLY
OPERATIONS AND ADJUSTMENTS MUST
ONLY BE CARRIED OUT AFTER THE
MACHINE HAS BEEN SWITCHED OFF
(MAIN SWITCH IN THE OFF POSITION)
AND
AFTER
IT
HAS
BEEN
DISCONNECTED
FROM
THE
ELECTRICITY MAIN.
4.1.1 CONTROL PANEL
(version 80-250)
The entire operating cycle of the dough mixer
is controlled by means of the control panel,
the voltage of which is reduced to 24 Volts
(Fig.7).
1) «First speed» timer.
Used to select the
required time setting (in minutes).
2) Emergency button.
Press this button to
disconnect the power source and stop all
the functions of the machine. The cycle
can be reset by turning the button and
then pressing the START button.
3) «Second speed» timer.
Used to select
the time required (in minutes) to complete
the work cycle and obtain a homogeneous
dough
that
corresponds
to
the
specifications required by the operator.
4) Bowl
rotation
reversal
selector.
Selector with two positions, plus neutral.
Reverses the rotation direction at the slow
speed only.
5) START button with indicator light.
Press this button to begin the work cycle.
When on, the indicator light shows that
the machine is powered.
6) Bowl rotation button.
This button stops
the dough tool from turning and can
operate in both the continuous and
intermittent mode. By keeping the button
depressed, the bowl will turn. If it is
pressed intermittently, the bowl will turn to
a sufficient extent to allow the operator to
empty it.
7) Second speed cut-out switch.
Allows
dough to be made using the slow speed
only. Turn the switch towards the right to
inhibit the second speed.
4.1.2 CONTROL PANEL
(version 30-40)
Consult the instructions in the previous
paragraph (4.1.1) in relation to points 1), 2)
and 3).
Points 4), 5), 6) and 7) are not pertinent to
this model of the machine.
8)
Start button to start the machine.
4.2
USE
WARNING
The operator must supervise the area in
which the dough mixer is installed so as
to prevent unauthorized persons from
accessing the so-called danger zones
whilst the machine is working. He must
also keep the area constantly clean and
free from obstacles.
