_______________________________
DOUGH
MIXER
IRIS
_______________________________
15
Fig. 8 - Machine’s main switch with two
positions (Fig.8), ON - OFF. The door that
accesses the electric panel remains locked in
the ON position
2)
Lift the protective grille (4 Fig. 1) to
immediately stop the motors.
3)
Now start to remove the dough.
The button (6 Fig. 7) allows the operator to
turn the bowl continuously or intermittently
and to access the part with the dough in
an easier way.
After this and if there are no other operations
to carry out, stop the machine in the
following way:
- press the red stop button (2 Fig. 7);
- turn the switch on the machine (Fig. 8) to
the OFF position;
- disconnect the machine from the electric
power source by means of the main switch
on the electricity main, prior to the
machine itself.
4.3
EMERGENCY STOP
Whenever the operator decides that the
machine must be blocked and prevented from
operating, he can raise the protective grille or
press the EMERGENCY button (red) on the
control panel. This latter action deactivates
the electric power supply.
4.4
CLEANING AFTER USE
WARNING
Disconnect the machine from the electric
power source before beginning to clean
the machine.
Remove any wet or dry residues and flour
dust with a slightly damp cloth.
WARNING
Never use continuous jets of water and
avoid splashing water indirectly in order
to clean the floor around and under the
machine. Once a month, remove the cover
and clean off the dust and residues from
the transmission with a vacuum cleaner.
Once the dough making and cleaning
operations have terminated, always make
sure that the electric power source has
been disconnected.
