Diamond 10GN 1/1, Инструкция по установке, использованию и обслуживанию

Страница: 23 / 24

46

Condenser cleaning: When cleaning, be careful not to bend the condenser aluminium ribs, as on the
contrary the air will not come through and will not condense, causing serious damage to the
appliance and its repair guarantee will be made void.

Check that the premise's temperature does not exceed that indicated for your Cooler.

The guarantee will be made void if there is insufficient ventilation.

Check that the doors close properly.

Do not disassemble the mobile components guards without first having turned the appliance off .

Use gloves before accessing the area of the condenser unit, given the existence of high
temperatures of some components, with the resulting risk of burns.

If the power cable is damaged, it should be replaced by authorised technical staff to prevent risks.

It if is replaced, the earth pin must be positioned again.

If you need to change a cable, you must never use a smaller section.

If it is necessary to disassemble the inner lid of the electrical installation, it is extremely important
to leave it exactly as it was when reassembling it.
8.6
TESTING AND GUARANTEE
The cooler has been tested the outcome of which has been satisfactory after the tests established for its
production.
The supplier may ask for the faulty part to be returned for analysis and statistics.
The company will correct any possible errors or faults as long as the machine has been used according to
the manual's indications.
IN THE EVENT OF PART REPAIR OR REPLACEMENT, ALWAYS SEND THE APPLIANCE'S CODE AND
REGISTRATION NUMBER, WHICH ARE ON THE NAME PLATE.
The instructions manual should be read at length, as there are some safety guidelines that should be born
in mind.
The company accepts no responsibility if the machine has been handled in any way not indicated in the
manual and by anybody who is not authorised or qualified.