Diamond 10GN 1/1, Инструкция по установке, использованию и обслуживанию

Страница: 17 / 24

40
The flushing cycle begins with the removal step. When the temperature detected by the needle probe
reaches the temperature at end of Chilling, the device will automatically switch to the maintenance.
The temperature at the end of Chilling also represents the setpoint of the work during the
maintenance.
When the set time has elapsed for the maintenance, the device automatically switches to the conservation.
The test of inserting the skewer is always carried out at the beginning of the cycle: if the test is not
completed, the buzzer sounds and the cycle is interrupted.
The cycle can be interrupted in advance by pressing the key
for 2 seconds.
6.6
HARDENING ICE CREAM
This type of loop is used mainly in the sectors gelato and pastry to give a "thermal shock" to the
products being processed. It is a cycle of continuous freezing.
Access the menu special cycles from key
and select INDURIMENTIO GELATO: at this point you will
display the splash screen from which with the keys it is possible to change the time
of the timer. The next pressure of the cycle will start and expiry of the timer will be
declared by the sound of the buzzer. The cycle will continue anyway until is pressed for 2 seconds the
key.
6.7
HEATING OF THE NEEDLE PROBE
The heating must be carried out with the door open and the possible closure of the door to the cycle already
begun will not affect the operation of the same.
Access the menu special cycles from key and select HEATING SKEWER: at this point you have
access to the boot screen. The next pressure of
the cycle will start and can be interrupted
at any time by pressing the key for 2 seconds.
The conclusion of the heating, the buzzer beeps for one second and the card back to the home page.