39
The preservation phase is infinite and has only completed by pressing the key
for 2 seconds. The
defrost cycles are always enabled during a conservation.
During the execution of a cycle by pressing the key, it is possible to access advanced page where you can
change the setpoint of work for the current cycle and display all the internal states of the machine.
6.4
DEFROST MANUAL
A defrost cycle is bootable manually only if there are certain temperature conditions (see the parameters d2
and d3). Access the menu special cycles from key
and select defrosting: at this point
you will display defrost and subsequent pressing of
the cycle will start.
If is present the evaporator probe and the conditions for performing a defrosting are not met at the
START button pressed, the card is returned in the menu special cycles and the defrosting is not performed.
If you set a defrosting with open door (D1=3), you will see the word "OPEN DOOR" if this is closed.
It is advisable to do a manual defrost after each cycle.
6.5
SANIFICACION PESCADO
Access the menu special cycles from key
and select sanitizing FISH: at this point you will
display the splash screen and subsequent pressing of
the cycle will start.
This is a special cycle consists of the following steps:
During the execution of a sanitizing, the device will always display the temperature of the chamber and,
depending on the current phase, the temperature at end of Chilling or the duration of the maintenance.
Содержание 10GN 1/1
Страница 1: ...Mod GTP 10 LD Production code 19048719 06 2018 ...
Страница 2: ...25 INSTALLATION USAGE AND MAINTENANCE MANUAL EVJ805 BLAST CHILLER ...
Страница 6: ...29 5 GN 1 1 10GN 1 1 ...
