diamond mowers Drum Mulcher OD Pro X, Руководство оператора

Страница: 38 / 44

© Diamond Mowers®, LLC
CONTINUED ON NEXT PAGE
PROBLEM POTENTIAL CAUSE SOLUTION
Large Trees
Won’t Process
Skid-steer / compact
track loader is
operating on
standard flow vs.
high flow Ensure skid-steer / compact track
loader is on high flow.
Drum running too slowly; allow
sufficient time for drum to obtain
full speed.
Worn / missing teeth
Confirm all teeth are present on the
drum and sufficiently sharp.
Variable
displacement motor
not tuned
Ensure motor displacement has been
tuned to the carrier’s PSI rating.
PROBLEM POTENTIAL CAUSE SOLUTION
Excessive
Vibration
Vegetation build up
on drum or cutting
teeth
Clean drum to remove debris by
first disengaging the implement and
backing up. This will typically clear the
cutting head.
If the cutting head does not clear,
shut down the implement and rest the
head on the ground. After the drum
has come to a complete stop, clear
the head manually.
•
DO NOT use extremities to
dislodge debris from teeth or
drum.
Missing cutting
tooth
Replace tooth.
•
Remove the bolts and
flat washers.
◦
DO NOT use Loctite.
•
Replace the bolts/washers by
hand-threading the bolts or use
an electric impact wrench set
on low.
◦
DO NOT use Loctite.
•
Torque to 120ft-lbs (163Nm).
◦
DO NOT over-torque as you
could strip the threads which
could allow it to become loose.
TROUBLESHOOTING
38