diamond mowers Drum Mulcher OD Pro X, Руководство оператора

Страница: 30 / 44

© Diamond Mowers®, LLC
HYDRAULIC HOSES & FITTINGS
•
Hydraulic hoses and fittings should
be inspected every 10 hours
or daily.
What to look for:
◦
Hydraulic fitting clamps and
threaded connections for any
hydraulic fluid.
-
If any leaks are observed,
stop immediately to prevent
damage to your machine.
◦
Hoses for any abrasions or cuts.
Replace damaged or worn hoses.
◦
Attach hose wrap around critical
points where hoses are likely
pinched or rubbed.
DO NOT check for hydraulic leaks with your hands or any part of your
body. Use a heavy piece of paper or cardboard to check areas that are
not readily visible. Pressurized hydraulic fluid can penetrate the skin
and lead to serious health risks.
MAINTENANCE
HOSE CARRIER
•
The hose carrier
(1)
should be
inspected every 50 hours
or weekly.
◦
Replace when wear is noted.
•
Adjust hose carrier bracket
(2)
approximately 15” (381mm)
(3)
from
center of hole to deck edge.
◦
Loosen the hardware and slide
the hose carrier bracket
(2)
up or
down the pushbar support.
◦
The hose bundle should be
suspended 2-3” (51-76mm)
(4)
from
the top of the deck.
(1)
(2)
(4)
(3)
30