manualshive.com logo in svg

diamond mowers Drum Mulcher OD Pro X, Руководство оператора

Поделиться
Скачать
diamond mowers Drum Mulcher OD Pro X Скачать руководство пользователя страница 12

© Diamond Mowers®, LLC

OPERATING YOUR DRUM MULCHER

CONTINUED ON NEXT PAGE

Before you operate, note that the primary responsibility for safety on this 
equipment falls to the operator. Only trained individuals who have read and 
understood this manual should operate this unit.  
 
If any portion of this manual is not understood, contact: 
Diamond Mowers’ Service/Warranty at 888.960.0364 or 605.977.3300.

Be sure to read all warnings carefully. They are included for your safety, 
and for the safety of others working with you.

 SAFETY TIPS

Indicates where 

SERIOUS

 injury or death 

WILL

 result if instructions 

are not followed.

Indicates where 

SERIOUS

 injury or death 

COULD

 result if instructions 

are not followed.

Indicates where 

MINOR

 injury 

COULD

 result if instructions are  

not followed.

Indicates a property damage hazard 

ONLY

, no 

PERSONAL

 injury.

 

•

Always wear personal protective equipment (safety glasses, goggles, 
etc.), when operating.

 

•

DO NOT

 operate this unit without a shatter resistant cab enclosure 

installed on your skid-steer / compact track loader; this unit will cause 
flying debris. 

 

•

Block off work area from bystanders, livestock, etc.

 

•

Bystanders must keep a distance of 300ft/100m from the unit  
when operating.

 

•

Mulcher teeth are always sharp and can cause injury, even when not  
in motion. 

12

Содержание Drum Mulcher OD Pro X













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды