diamond mowers Drum Mulcher OD Pro X, Руководство оператора

Страница: 27 / 44

© Diamond Mowers®, LLC
CHAIN GUARD
•
The chain guard
(1)
and its mounting
hardware hardware
(2)
should be
inspected every 50 hours or weekly.
•
Replace damaged / worn chains
(1)
and mounting hardware
(2)
as needed.
◦
Re-tighten the lock nut
(6)
on the
tension adjustment bolt
(7)
.
•
Pulley
(9, 10)
alignment:
◦
Use a straight edge
(8)
to confirm
the motor pulley
(9)
is aligned with
the drive pulley
(10)
.
Correct as needed:
-
Remove the belt
(2)
as detailed
in the previous section.
-
Remove the motor pulley
(9)
set-screws
(11)
.
-
Thread a set-screw
(11)
into the
unlocking hole
(14)
to slightly
open / loosen the taper-lock’s
clamp on the ss.
-
Lightly tap the taper-lock
(12)
and motor pulley
(9)
in the
desired amount and direction
on the splined motor shaft
(13)
.
-
Without moving the motor
pulley
(9)
and its taper-lock
(12)
,
thread in the set-screws
(11)
and torque to 55ft-lbs (75Nm).
-
Check alignment, and repeat
as needed.
-
Replace the belt
(2)
as detailed
in the previous section.
(2)
(1)
(9) (7) (10)
(9)
(12)
(13)
(11)
(14)
(2)
27