DiamaPro Systems DX26-P, Руководство пользователя

Страница: 3 / 24

Rebar or utility lines may be buried in concrete. Disconnect the power to
any utility lines. If these dangers are present are to be missed, clearly mark
the area.
Loose debris could be thrown from crack. Make sure area to be cut is clear
from people and any loose objects, nuts, bolts, etc. Never run over any
loose objects.
Do not allow anyone to stand in line with the grinding path. Do not let chil-
dren or visitors in contact with machine or extension cord. Keep children
and visitors away from the work area.
Diamond Tooling produce heat and sparks during operation. Never
use machines in dangerous sites containing flammable, combustible or
explosive materials such as lacquer, paint, benzene, thinner, gasoline,
gases, and adhesive agents.
The Diamond tooling and shroud become hot during operation and remain
hot after stopped. Do not touch the tooling and shroud without proper hand
protection.
Keep a firm hold on the handle grips and maintain control of the machine
until the grinding completely stops.
Never use a cracked, damaged, or misaligned tooling. After mounting
check to see tooling is secure.
Running the wrong type/size of tooling can cause damage to your machine
Do not force a small grinder to do the job of a heavy-duty grinder. Do not
use the walk-behind grinder for improper applications. Never cut material
for which the tooling was not designed.
The machine and tools should be stored in a dry and secure location when
not in use. Keep equipment out of reach of children.
The grinder will do the job better and safer at the rate for which it was
designed.
This includes primers, all coatings, adhesives, tile and crack filling materi-
als, etc. Do not attempt to cut, clean out or remove material without MSDS
information. Consult MSDS sheet for hazards information. Be aware that
some materials are explosive such as dust.
Always keep proper footing and balance.
Keep machine clean and follow maintenance procedures for better and
safer performance. Keep handles dry, clean, and free from oil and grease.
Follow instructions for lubricating and changing accessories.
Thank you for purchasing a DIAMAPRO SYSTEMS
®
product. This manual
provides information and procedures to safely operate and maintain the
DiamaPro DX26-P. For your own safety and protection from injury, carefully
read, understand, and observe the safety instructions described in this
manual. Keep this manual or a copy of it with the machine. If you lose this
manual or need an additional copy, please contact DiamaPro Systems
®
.
This machine is designed and built with user safety in mind; however, it
can present hazards if improperly operated and serviced.
Please follow the operating instructions carefully. If there are any questions
regarding operating or servicing of this machine, please contact
DiamaPro Systems
®
.
Disclaimer: DiamaPro Systems
®
and its affiliates take no responsibility
for any damage, injury or death resulting from the incorrect or unsafe use
of this product. Use of this product should be undertaken by competent
persons only. It is the operator’s responsibility to ensure that the following
safety procedures are followed. If you are unsure, do not operate this
product.
Most job sites have rules governing equipment use & maintenance. Before
starting at a new work location, check with the supervisor or safety coordi-
nator. Ask about any rules or regulations you need to abide by.
OSHA enforces federal laws within the United States that apply to the safe
operation, application, & maintenance of equipment on job sites. It is the
employer’s responsibility to comply with these laws.
Do not operate this machine unless you carefully read the operations and
maintenance manual.
Do not operate this machine unless you have received operational and
maintenance training from a DiamaPro Systems
®
representative or from an
authorized distributor for DiamaPro Systems
®
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved foot protection.
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved safety glasses.
Breathable silica may be generated by use of this product. Silica can
cause severe and permanent lung damage, cancer, and other serious
diseases. Do not breath the dust. Do not rely on your sight or smell to
determine if dust is in the air. Silica may be in the air without a visible dust
cloud. If air monitoring equipment for silica is not provided by your employ-
er at your work site, you MUST wear appropriate respiratory protection
when using or servicing the machine. Consult your employer and OSHA
regarding the appropriate respiratory protection.
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved hearing protection.
Do not wear loose clothing or jewelry that can be caught in moving parts.
Wear protective hair covering to contain long hair. Keep hair away from
motor air vent. Rubber gloves and non-skid footwear are recommended
when working outdoors.
Do not expose machine to rain. Do not use machine in wet conditions.
Keep work area well lit. When working at an elevated location, pay atten-
tion to articles and persons below.
INTRODUCTION
1. SAFETY INSTRUCTIONS
1.1 KNOW THE RULES & YOUR EQUIPMENT
1.2 RECEIVE PROPER TRAINING
1.3 PROTECT YOUR FEET
1.4 PROTECT YOUR EYES
1.5 PROTECT YOUR LUNGS
1.6 PROTECT YOUR EARS
1.7 DRESS PROPERLY
1.8 AVOID A DANGEROUS ENVIRONMENT
1.9 BEWARE OF HIDDEN DANGERS IN
CONCRETE
1.10 KEEP WORK AREA CLEAN - DO NOT RUN
OVER ANYTHING
1.11 KEEP CHILDREN AND VISITORS AWAY
1.12 AVOID FLAMMABLE LIQUIDS OR GASES
1.13 AVOID CONTACT WITH HOT TOOLING
AND SHROUD
1.14 KEEP FIRM GRIP ON MACHINE
1.15 CHECK TOOLING FOR CRACKS, DAMAGE,
AND MISALIGNMENT
1.16 DO NOT FORCE WRONG SIZE OR TYPE OF
TOOLING ONTO MACHINE
1.17 USE EQUIPMENT AND ACCESSORIES
PROPERLY
1.18 STORE IDLE EQUIPMENT
1.19 DO NOT FORCE
1.20 OBTAIN MATERIAL SAFETY DATA SHEET
(MSDS) FOR ALL WORK SURFACE
MATERIALS
1.21 DO NOT OVERREACH
1.22 MAINTAIN MACHINE WITH CARE