DiamaPro Systems DX26-P, Руководство пользователя

Страница: 7 / 24

2. MAINTENANCE & REPAIR (cont).
Gearbox
Oil Cooler
Spark plugs
Clutch Belt
Safety Systems
Integrity of Pictograms
Weekly
Or every 40 hours
Weekly
Or every 40 hours
Weekly
Or every 40 hours
Weekly
Or every 40 hours
Daily
Weekly
Or every 40 hours
NAME OF
OPERATION
FREQUENCY PERSON IN
CHARGE
OPERATING INSTRUCTIONS
STATE OF
MACHINE
MECHANICAL PARTS
Machine stopped /Power
sources disconnected
Machine stopped /Power
sources disconnected
Machine stopped /Power
sources disconnected
Machine stopped /Power
sources disconnected
Machine Stopped
Machine stopped /Power
sources disconnected
The gearboxes are sealed upon assembly; if you
notice oil leaks, carefully find out their origin be -
cause there may be leaks from other sources. If the
leaks come from the gearbox, contact our technical
service or a qualified technician.
Clean any oil leaks at the bottom of the grinder. For
a possible change of the lubricant due to leaks or
for the topping up operations, use the following type
of lubricant: MOBIL SCH 630
Check & clean any dust or debris, especially if you
are working in dusty conditions
Inspect Spark Plugs. If you need a replacement,
refer to the engine manual.
Be careful when removing the spark plug:
• wait for the engine to cool down;
•remove the cap;
• remove the spark plug down away from the
spark plug holder (because spark may be
triggered).
Check belt for proper tension or abnormal wear.
Replace if needed
Please note the requirement to perform the
checking and recording of verifications of safety
components every 6 months.
CAUTION
!
DO NOT REPLACE THE GEARBOX.
CONTACT DIAMAPRO SYSTEMS OR
THE AUTHORIZED DEALER.
SAFETY SYSTEMS