JINDLU04 Rev G 21/04/16
4.
Release the door catch and hold the
door ajar.
5.
Offer the Door Fascia into position,
passing the 3x M6 studs through the
holes in the door and fix in position
using the nuts and washers provided.
6.
Close the door and check the
alignment of the Door Fascia with the
frame. Adjust as necessary.
7.
Attach the door handle to the door
lever using the M6 screws and
washers. Check the alignment of the
handle with the door fascia and adjust
as necessary.
The door handle should
be flush with the fascia and have an
even gap around it when in the
closed position.
C
OMMISSIONING
Upon completion of the installation allow a
suitable period of time for any fire cement
and mortar to dry out. A small fire may then
be lit and the installation checked to ensure
the smoke and fumes are drawn up the flue
and emitted safely to atmosphere. The stove
should not be run at full output for at least 24
hours.
Read the Operating Instructions
before lighting the stove for the first time.
Leave the instructions and operating tool(s)
with the customer and advise them on -
Correct use of the appliance
The recommended fuel
Action to be taken should smoke or
fumes be emitted from the stove or
installation.
The use of a fireguard when the stove
is used in the presence of children or
the infirm.
