DHS Systems DRASH S Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 64

S Series Shelter Operation & Maintenance
95310-02 2-11 DHS Systems, LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may
be reproduced for release to a third party without written consent from DHS Systems LLC
.
WP M --- . -- -95310-02 Installing Shelter Accessories
015.01 S-Shelter-to-Shelter Connector Procedure
The Shelter to Shelter Connector
Set provides a full size weather
and light tight passageway
between additional S Shelters.
The Connector Set consists of an
Interior Connector and Exterior
Connector that attaches at the
doorways of an S Shelter. To
connect multiple S shelters
together:
1. Remove the connector set from the Shelter Storage Bag
The Interior Connector will be white on the interior and black on the exterior surface.
The Exterior Connector will be black on the interior and either tan or green on the exterior surface.
2. Remove the existing exterior door and interior door from the Shelter and place both in the Shelter Storage Bag.
3. Match the Brown tab at the peak of the exterior Shelter cover with the Brown tab in the center of the Exterior
Connector.
4. Starting at the peak, begin attaching the Velcro strip on the Exterior Connector to the Velcro strip on the Shelter
doorway, working from the peak outwards and down towards each bottom end.
5. Repeat the above procedure to join the Exterior Connector to the second Shelter.
6. To place the Interior Connector, match the Brown tab at
the peak of the interior Shelter cover with the brown tab
in the center of the Interior Connector.
7. Starting at the peak, begin attaching the Velcro strip on
the Interior Connector to the Velcro strip on the interior
shelter doorway, working from the crown outwards and
down towards each bottom end.
Figure 2-15 - S Shelter with Exterior door removed
NOTES
INDIVIDUAL SHELTERS MUST BE PROPERLY POSITIONED PRIOR TO
INTERCONNECTING.
GROUND COVERS SHOULD ABUT EACH OTHER ON THE DOORWAYS.
BROWN TAB
NOTE
THE FOLLOWING PAGES DESCRIBE TWO SHELTER-TO-SHELTER CONNECTION PROCEDURES.
WP 016.00 is the Shelter-to-Shelter connection procedure for Shelters manufactured prior to Jan 01, 2003.
WP 015.00 is the Shelter-to-Shelter connection procedure for Shelters manufactured after Jan 01, 2003.
The two figures below show the difference between the old and new styles. Figure 2-15 shows the newer style
Shelter in which the entire door has been removed at the outer Connector Strip.
Figure 2-13 shows the older style Shelter in which the door has to be removed at the inner Connector Strip.