Dhollandia DH-SM, Руководство по установке

Страница: 8 / 69

7
DHOLLANDIA
WARNING
•
The installers are exposed to various dangers. Improper use of the liftgate, ignorance and neglect during installation, will put them
at great risk of bodily injury and death.
•
Once the liftgate is in service, improper installation can cause damage to the liftgate, can reduce its durability and reliability. Further,
it can also put the operator and bystanders at great risk of serious bodily injury and death.
•
Therefore installation works MUST carried out by skilled technicians, who have been professionally trained, and master the content
of all manuals:
1. OPERATION MANUAL
2. INSTALLATION MANUAL
3. GENERAL SAFETY INSTRUCTIONS FOR INSTALLATION, MAINTENANCE AND REPAIR
•
ALWAYS confirm you have reviewed the most up-to-date version of these manuals prior to installation and operation of the
associated DHOLLANDIA liftgate.
•
In case of doubt, ALWAYS contact the national DHOLLANDIA distributor for further advice, prior to continuing.
•
ALWAYS wear appropriate Personal Protective Equipment. This includes but may not be limited to: safety glasses with side guards
or a wrap-around face shield; steel toe safety shoes; fire-resistant overalls; protective gloves; adequate ear protection; a safety
helmet when working under the vehicle chassis.
•
NEVER wear loose-fitting clothes that may get trapped in the moving parts of the liftgate, or in any machinery and tools used for
the installation. Don’t wear rings, bracelets, necklaces, watches etc…
•
ALWAYS use the proper tool for the job. Replace worn or damaged tools before use.
•
Pay special attention to the lifting devices (forklifts with slings, overhead cranes, hoists, etc.) used to handle the liftgates, and for
the clamping tools used to clamp the liftgate, its platform, mounting plates and various other components to the vehicle chassis
and / or body. Ensure these tools are appropriate for the job, and in good working order.
•
Place the vehicle on a flat even ground and chock the wheels so that it cannot move during the installation. In case of a motor
vehicle, make sure the engine is off and the parking brake is engaged.
•
Do not work underneath the liftgate or within reach of the platform and the moving parts, without properly securing and supporting
the platform and the lift frame against an accidental fall. Use an overhead crane and hoists, a forklift with slings or equivalent means
to secure the heavy components.
•
NEVER modify DHOLLANDIA liftgates or their mounting plates without prior written approval from the manufacturer.