Dhollandia DH-AI02.04.01, Руководство по установке

Страница: 14 / 45

13
DHOLLANDIA

Where required, the relationship between % and ° ramp angles is as follows:
Percentage ramp angle degrees
30% 16.7°
25% 14°
20% 11.3°
15% 8.5°
10% 5.7°

Check if the vehicle chassis and body are sufficiently strong to carry the proper weight of the ramp with its nominal load, both
statically and dynamically.

When unsure about the suitability of the vehicle, contact your DHOLLANDIA distributor.

Practical check: On technical drawings in paragraph 7.4, a bumper clearance curve is drawn. Use the dimensions on this
drawing to verify the suitability of your vehicle.
7.3 LATERAL INSTALLATIONS

When the ramp is located at the side door it is possible that it stands over a stepwell. A support must be created to fill the gap
between the base plate and the step.

This support needs to be level with the vehicle floor and sufficiently strong to sustain the forces induced by the load on the
platform.