Dhollandia DH-AI02.04.01, Руководство по установке

Страница: 19 / 45

18
DHOLLANDIA
8 INSTALLATION OF THE DH-AI

Due to the wide range of vehicles on which DH-AI ramps can be mounted, detailed fitting information for all vehicle types is not
available.

In this paragraph, the most common installation cases will be explained in a generic way.

When in doubt about a specific installation case, contact your DHOLLANDIA distributor before making any permanent changes
to the vehicle. See contact info on page 3.
8.1 INSTALLATION KIT – SCOPE OF DELIVERY

AI-ramp and its optional extras

Bolts and nuts: the kit contains a set of bolts and nuts suitable for most installation situations. Other bolts and nuts for deviating
installation situations are not included in the kit.

Flanges, big washers, mounting brackets for the underside of the vehicle floor / chassis are not included in the kit. They are to
be provided by the installer.

In case something is missing, contact your national DHOLLANDIA distributor. See contact info on page 3. Or refer to the parts
list to find replacement parts.
8.2 PREPARATION

Remove any obstacles within the door opening or the mounting area.

Remove or adapt the floor coverings in case of interference with the ramp fixations, the ramp frame + base plate.

Remove all objects (spare wheel carrier, parts of the exhaust pipe, …) that could hinder the mounting of the ramp. For
permanently removed parts, consult with the vehicle manufacturer for replacement solutions.

Make sure the vehicle floor is sufficiently strong to support the weight of the ramp and its load.

Make sure the ramp can be mounted on a straight and rigid floor surface.
NOTICE
The installation of the ramp on non-planar, soft or flexible surfaces and the incorrect fastening of the mounting bolts can cause
deformations to the ramp frame + base plate and lead to incorrect unfolding / folding of the platform during use.