DHG Bure Double 2.0, Инструкция по эксплуатации

Страница: 6 / 126

6 I F U
3. Using Bure Walker
Standing up and walk training
1. Ask the patient to sit on the edge of the bed or chair. Bring out the walking table and place it in front of the
patient. Lock the brakes on the wheels.
2. Ask the patient to place their arms on the armrests. If necessary, ask the patient to move forward on the seat
base so that the patient reaches the handles.
3. Ask the patient to lean forward. To start raising the walking table, press the UP button on the hand control.
Raise the walking table to a desired height.
4. Unlock the brakes. Adjust the height of the walking table to a desired position
5. Assist the patient while walk training.
Using Bure Walker with Gait Training Kit 56-388
• The support harness has four blue straps with a plastic
buckle allowing for adjustments in length, having steel
carabiner clips at the ends to be fasten to the gait walker.
The carabiner clips on to the metal mounts placed under
the table of the Gait walker.
• Apply the walker support harness by clipping on the two
front carabiners to the front mounters, one on each side
of the table.
• Place the patient standing up in the walker. Pull back the
harness in between the legs and clip on the carabiners to
the back mounters, one on each side of the table. Adjust
the harness to the patient by pulling in the back strap
loops.
• Observe!
Intended use of the trainer support harness is to
practise walking. It is not a sitting or lifting aid .
Standing Plate
Attach standing plate by hooks on the main frame of the walker.
Before use:
•
Inspect the packaging for any damage.
•
Check for correct product being delivered.
•
Check to ensure that the device is free from damage.
•
Check if all the parts/components are included in the packaging.
•
Check if all approved accessories are included in the package.
•
Check if Product Quality Approval document is included in the packaging. Save this document for future
contact with manufacturer.
•
Make certain the device is properly assembled.
•
Check lifting function and bottom-frame adjustment function.
•
Check if it is possible to move the device in all directions.
•
Check the condition and function of the sling/belt regularly. Always inspect the product after laundering. The
occurence of the following must be checked: frays, loose stitches, damage to the fabric, edging, handles,
broken buckles. If any of these points apply, the product should be discarded.