© 2010 DHD Deubner Hoffmann Digital GmbH
16
Series 52 - 52/XR MADI Router Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
The Network Config window shows the current IP configuration of the
device with the serial number which is entered in the Serial No text field.
Serial No - The Serial Number
The device of which you can see the network settings, is always represented by its serial number (
Serial No
). This
serial number is unambiguous and is only valid for one single controller. You can use the field to read out settings of
devices that are located in a different network segment. Read more about this in section "If you do not see the device in
the list (b)".
Hardware Name - The Device Name
You can provide every Series 52 system with a device name (
Hardware Name
) which will specify the device. This name
will help you to identify the device in the network. You can choose any name up to 20 characters; however, no space
characters are allowed. Not allowed special characters are rejected on entering.
Automatically via DHCP - Automatic IP Assignment by a DHCP Server
If there is a DHCP server on the network, which is also supposed to carry out the IP configuration of the 52/XR MADI
Router, please just select the
Automatically via DHCP
radio button.
Fixed - Fixed IP Setting
If you cannot access a DHCP server or you want manually carry out the IP configuration, please first select
Fixed
and
then fill in the according values (
IP Adress, Subnet Mask, Gateway, Broadcast
) into the activated text fields.
Important
In case of questions about the parameters to be set, please contact your IT
department or your network administrator.
